How Many Types of Table Saw Blades Do We Have? Best Tips For You!

It’s time for woodwork, but you do not know how to start. How about choosing the blade? But, how many types of table saw blades are there? And which one should you choose?

We have more than one way to categorize the saw blades. Don’t worry! Your decision is not as difficult as you may believe. This article has covered all of the many types of blades available. We also mention some tips on picking the right tool. 

Let’s read on to discover!

What Is A Table Saw Blade? 

A table saw is a piece of popular woodworking equipment because of its versatility. It can assist you in making precise and accurate cuts in wood.

The blade is the most important part of a table saw. It must be capable of doing several fundamental functions well. We also get to utilize the blades for a variety of tasks and materials.

You may require the blade to work with sticky materials like plywood or plastic. You may also have the blade to make all of the necessary timber cuts. Moreover, you should use a specialized blade on your table saw to cut through harder material.

You must be searching for a multi-purpose blade. However, a blade only specializes in one purpose. If you have your plan, you should learn more about the blade types to do your best work.

Main Types Of Table Saw Blades

We can divide table saw blades into four main types based on their purposes. The blades are for ripping, crosscutting, sheet good, and thin-kerf. We can combine some types in one too.

1. Ripping Blades 

We utilize ripping blades for usage on natural timbers. We can use them to cut along the grain of the wood. 

Ripping blades work with 24 to 30 broad teeth, which means that they can assist you in quickly tearing through natural wood products.

Before making more accurate cuts, some individuals use the ripping blade to cut through big slabs of hardwood.

The ripping blade also works well with wood framing tasks.

Unfortunately, it does not offer smooth cuts.  However, because the parts will be sawn to final proportions later, we can deal with the rough cuts.

How Many Types of Table Saw Blades Do We Have 

2. Cross-Cutting Blades 

Crosscut blades can cut across the grain of your material and often have 80 to 90 teeth. 

As you can see, they have much more teeth than a ripping blade. Because the blade’s teeth can make a very fine, accurate woodcut, they produce more sawdust for sure. It will also offer a smooth-cut surface for an additional clean finish.

We can utilize cross cutting blades for natural wood. It is also feasible to cut metal. 

However, there is less room between the teeth for removing the chip. As a result, the pace at which you feed the saw must be consistent.

Cross cutting blades have many teeth

3. Sheet Good Blades 

Plywood, melamine, hardboard, particleboard, and plastic laminate are all examples of sheet products. The material will determine the optimum blade for the work here.

Sheet-good blades require more teeth to achieve a level bottom cut because sheet products are all very thick materials; the more teeth, the better.

The first time you use the sheet good blades, it might be a little scary. In one pass, you can hog off a lot of timber. So don’t hurry! Do your tasks carefully, and protect your hands with safety guards.

Get to know how to use feather boards and a fence to produce effective plywood cuts.

Sheet good blades also come with many teeth

4. Thin-Kerf Blades 

A thin kerf blade offers 3/32-inch teeth. Because of the teeth’ thinness, there is less sawdust and abundant wood. 

For thin-strip ripping works, this blade type is ideal. The blade can precisely tear your wood to the desired breadth.

When cutting thick, tough stock with a low-powered saw, thin-kerf blades are likewise a suitable choice.

The disadvantage is that the thinner plate tends to flutter, resulting in a somewhat harsher cut.

Thin-kerf blades work with thin teeth

5. Combination 

Combining the blades can bring you the best cut. You can rip and crosscut at the same time.

Combination blades have 50 teeth placed in five groups. The teeth are in charge of tearing. However, they can also provide neat crosscuts. 

You can combine the blades

It will give wood and wooden compounds a smooth surface. They can also cut through tougher materials like brick.

Combination blades are good choices if you are new to woodwork. They can help you do various jobs, including cutting plywood, natural wood, or high-pressure timbers.

You may use them to deal with lightweight veneers as well. They can assist in making quick and accurate cuts.

Other Ways To Classify Types Of Table Saw Blades 

We can also group table saw blades according to other factors rather than their purposes. Size, teeth, and material can also help to distinguish the blades.

Size 

Each blade size serves a certain cut style.

The majority of blades have a standard diameter of 10 inches. Sizes often range from 8 to 12 inches. Some blades are as large as 30 inches. However, the large blades are not popular among woodworkers.

Blades vary in size

The center arbor hole on most table saws is 5/ inches in diameter. Some models have different specifications than others. As a result, make sure you read the instructions before using them. The instructions can help you find out what size blade the arbor can take as well.

Teeth 

When it comes to accuracy, the teeth of a blade make all the difference. The number of teeth on your blade can determine the blade type. 

The composition of each blade is unique. Yet, most blades contain from 24 to 80 teeth. It depends on the work cuts such as ripping or sheet goods. 

Blades with fewer teeth often provide faster cuts. They can increase gullet size, which allows the removal of wood particles. However, blades with more teeth can give you smoother cuts. 

Other elements, such as feed speed, have a role too. This is the rate at which the saw blade browses the material.

Material 

Carbon steel and steel are the most popular materials to make table saw blades. Meanwhile, the teeth often come from tungsten carbide and hard metal. 

Yet, we use blades to cut through a variety of firm surfaces. As a result, we apply various materials to make blades.

Some producers even apply diamonds to the tips of the teeth. In this case, they often mix a diamond with powder metal. We can take advantage of that combination to handle ceramic tiles.

How To Choose The Right Types Of Table Saw Blades 

So, what exactly do you require for regular woodworking? Think about the options below:

  • You can pick up a decent-quality combination blade for most of your table saw tasks. But don’t forget that good woodworking necessitates a good blade. This is not the time to give in to your stinginess.
  • If you are going to be sawing many hardwoods, a 24-tooth ripping blade will save you time.  We do not usually spend the top price for ripping blades because they cut a little rough anyhow.
  • When it comes to cross cutting timber or plywood, a top-grade 40-tooth blade will suffice. If you can buy one, acquire a good 80-tooth chop saw blade. You can also put it on your table saw when you need to perform the best crosscuts or panel cutting possible.

Related article:

How To Choose High-Quality Table Saw Blades

High-quality blades may make each cutting job easier and more pleasurable. 

When searching for a new table saw blade, please keep the following qualities in mind:

  • Titanium teeth work well and can help you make a lot of clean and quick cuts.
  • The blade needs coating to avoid deterioration and burns. This is especially essential when using a combination blade.  Thanks to the coating, you can work slower to cut through specific materials and create clean cuts.
  • A braze layer of shock resistance can maintain the blade’s sharpness. Despite the force of intense labor, you may keep the blade for a longer time.

Conclusion

After reading the post, you may know some types of table saw blades. The saw blade is one of the most crucial components. Don’t be rash and choose the wrong one.

We hope that you find the article helpful. If you still have questions about table saw blades, please feel free to ask. Leave a comment below, and we will assist you as soon as you can.

Thank you for reading!

Reference Source: Table Saw Blade Selection

Leave a Comment