Table Saw or Circular Saw: What Should You Choose?

You have a woodwork project and you need to choose a tool. However, deciding table saw or circular saw is not a simple task. What are the differences? When to use each tool?

This article gives you a side-by-side comparison. It also helps you to make up your mind for a better tool. 

Let’s read on to discover!

Table Saw Overview

A table saw looks somewhat like a miter saw. It has a blade extending from underneath a table. Yet, the table saw serves more purposes than a miter saw

The top of a table saw functions as a support surface to cut the materials. The blade extends over the tabletop, letting you cut stuff while moving it through the blade.

Table saws enable you to adjust the path of the cut by moving material through the blade. Table saws are only capable of cutting in a straight line. Most of them can tile the blade in relation to the table top, allowing you to create miter angles with a straight line.

Table Saw or Circular Saw

Circular Saw Overview

A circular saw is a bladed portable saw. You can use electricity or a battery to power this saw. Circular saws are also quite common. Because there is no wire to worry with, they are a high-quality choice for on-the-job application.

The blade will chip away at the cutting surface while spinning. You should run the saw over the length or breadth of the item you are cutting with your hand. To ensure safety, you should equip the circular saw with an electric brake.

A circular saw depends on you to operate it and has no extra guidelines. Hence, the cuts it creates aren’t perfectly straight. If you shake your hand, you’ll create erroneous cuts.

A circular saw depends on you to operate it 

Comparison Between Table Saw vs Circular Saw 

A table saw and a circular saw differ in their cutting abilities, speed, versatility, accuracy and cleaning after use. Let’s have a look at all factors.

Accuracy

Regarding accuracy, table saws provide more precise cuts for most situations. The sharpness of a circular saw, on the other hand, depends on the user’s ability.

To enhance the precision of your cut, you might use circular saw rails or a straight edge. However, you may find it harder to make precise cuts while using a circular saw.

You can use both saws to create the same cuts. Yet, you’ll need a lot more skills and technical understanding to use a circular saw correctly. This is to avoid mistakes.

A table saw offer more accurate cuts

Versatility

The circular saw wins a point when it comes to versatility. It can deal with lengthy rip-cuts, bevel and cross cuts. All you’ll get is a variety of blades for multiple tasks. The right circular saw blade also enables you to cut metal and bricks.

The table saw, on the other hand, is suitable for woodworking. It can also work with plastic or softer stuff . If you plan to cut MDF or hardwood, you have to utilize the carbide blades.

Both of the saws can cut almost any material. Yet, the table saw can only handle limited size. If you intend to crosscut a huge plank of wood, you’ll need a larger table saw and maybe some extra supports.

Usage

A table saw is easier to operate. All you have to do is put the materials on the table and let it do the cut. You don’t have to spend much time thinking about how to use it.

Of course, you must be familiar with the fundamental operations as well as safety work. However, a table saw requires very little knowledge to begin working efficiently.

When running a circular saw, you have to understand how to operate it properly and safely. It isn’t as simple as it sounds.

Speed

Circular saws can save you lots of time. They  are quite simple to use when making a fast cut. They’re also incredibly easy to implement.

Circular saws work like hand saws. Hence, you move the saw through the cut using your hand. You don’t have to set up the table fences or adjust the saw heights like using table saws.

Circular saws are portable. So, you can port it everywhere to do your job. Meanwhile, a  table saw usually necessitates bringing the item to the saw.

You can speed up your job with a circular saw 

Cutting function

Cutting abilities are another distinction between a circular saw and a table saw. Table saws can create accurate crosscuts and rip cuts. Yet, they can’t make bends or notches. If you need these cuts, use the circular saw.

A circular saw, however, isn’t the optimum tool for making some woodworks. In this scenario, you should definitely employ a jigsaw. This tool is more user-friendly for this work. 

A circular saw, on the other hand, has a larger variety of cutting abilities due to its convenience.

Dust

Table saws have the advantage in such a way that there is very little sawdust blown around. Most  sawdust lands beneath the table. 

As a result, putting a dust collecting box underneath the table will catch the dust. Clear the dust on the table with a compact vacuum and you’re ready to go.

Pros and Cons of Table saw vs Circular saw 

We have just compared all the factors of the table saw and circular saw. Now, let’s sum up their benefits and drawbacks.

Table saw

Pros:

  • The cuts are exact and clean.
  • Crosscuts and ripping boards are simple to do.
  • It has a great sawdust disposal system.
  • It’s simple to keep up with.

Cons:

  • You can’t move the table saw easily.
  • These sorts of saws are rather pricey.
  • If you’re new to the tool, it might be risky.

Circular saw

Pros:

  • It’s a cordless saw with a lot of versatility.
  • This saw is lightweight and portable.
  • It is less expensive than a table saw.

Cons:

  • The cuts it makes aren’t as clean as those generated with a table saw.
  • There is no way for sawdust disposal.

When to use each saw?

Table saws

A table saw is a wise option when you’re just getting started with handhouse tools. Or, if you need strong and precise cutting equipment for your workshop, you should go for a table saw. 

Similarly, if you have a huge project that requires a lot of precise cutting, a high-quality table saw is your best choice.

Circular saws

There are just a few occasions in which a circular saw is suitable. If you’re operating on a job that requires a lot of traveling around, a circular saw’s versatility will come in handy. 

A circular saw, on the other hand, is a fantastic alternative if you regularly exchange tools with your friends or relatives because you can easily move it back and forth.

Conclusion

Before deciding to choose a table saw or circular saw, you should consider all the factors. What do you need the tools for? How much can you spend on the jobs? Do you need to carry the tool around? After answering these questions, you must know what you are looking for.

If you have any questions, please feel free to ask.

Thank you for reading.

Reference Source: Table Saw vs Circular Saw: Which is Best and Which Should You Buy First

Leave a Comment