How to start a generator that has been sitting safety? Discover Now

Usually we buy generators for backup in case of power cut. Because power cut does not happen often, it may take a long time to be used again and there may be some inadequacies. How to safely use the generator after a long period of non-use. Let’s get started with us.

How to start a generator that has been sitting safety?

How to start a generator that has been sitting?

To properly start the generator you need to follow these 7 steps:

  • Step 1. Check the generator set. You should make sure your generator is still intact, no damage or strong impact has occurred before.
  • Step 2. Check the fuel. Generators are powered by gasoline or diesel fuel (depending on the type of machine). 
  • Step 3. Check Spark Plugs. This is an important part of the generator to work. Make sure it stays dry and in good working order.
  • Step 4. Check the Air Filter. If the air filter is dirty after a long time of not being used, it will reduce the performance of the machine. 
  • Step 5. Fuel line and Fuel filter. These are also important parts you must check and clean.
  • Step 6. Clean the Carburetor.
  • Step 7. Start the Generator With the Electric Starter after the components have been secured.

Detailed step-by-step instructions

Step 1. Check the generator set

The first step of this basic check is often overlooked by people because they consider it unnecessary. However, leaving your generator in storage for a long time not in use can cause collisions when moving items. Or the mouse got into the machine and cut off a certain part of the wire?

So, for your own safety, conduct a preliminary check of the generator before taking the next steps. Criteria to ensure a generator can work properly is that it has enough oil, the fuel valve is working and the inductor is still in good use.

You should check the kit before going into details

Step 2. Check the fuel

If you do not use the generator for a long time, the fuel left in the generator after the last use will easily decompose. This is a process, a completely natural reaction. So before starting to use it again, you should check whether the fuel is safe and sufficient.

The simplest way to determine if fuel is safe is by its appearance. If you notice the fuel is slightly cloudy or foggy, we recommend that you discontinue using this fuel. You should exhaust all the air and add new fuel afterward. 

To avoid wasting fuel you can give a sufficient amount of fuel to use. Or suck all the fuel out after using it. Another way is to use a fuel stabilizer. This is considered one of the important things to have when you own a portable generator.

Step 3. Check Spark Plugs

To check the spark plug you just need to pull it out and look and you can know its condition. Now if you find it dirty, use a fuel tank cleaning tool to clean it. When cleaning, make sure the spark plugs are clean and dry!

If you find that the spark plug is damaged or has worn out due to repeated use, please replace it with a new one! Replacing spark plugs is pretty easy and you can buy it just about anywhere.

Step 4. Check the Air Filter

Now let’s continue with the air filter. You know, generators always need a flow of air to operate efficiently. This is also an important reason for you to check your generator’s air filter.

The generator is likely to be clogged with dirt and that is the main reason why the generator won’t start. To handle it is very simple, you just need to pull out the air filter, then check if it is clogged or not.

Step 5. Fuel line and Fuel filter

The fuel line is the most important part that you cannot ignore. Only when fuel is supplied to the components it can work. Leaving a generator used for a long time can lead to any kind of blockage. For these causes you can fix it. But if you find it too difficult for you, you should replace it with a new one.

In practice, a serious failure of the feedstock line usually does not occur. So you just need to check and clean it. If you’re a careful person, you probably have a backup raw material pipeline.

Step 6. Clean the Carburetor

You can use some specialized carburetor cleaners. Using it you just need to spray it into the carburetor injectors and nozzles. Spraying with specialized cleaners will not cause severe scratches or damage. Cleaning the carburetor is very important because materials or impurities left inside can cause generator problems.

Starting the generator needs to carefully check the parts

Step 7. Start the Generator

In case your generator starts with electricity, check its battery. If you notice the battery is dead then you need to replace it. If the battery is not dead, check to see if the fuse is blown.

If the battery of the generator is still good you should also note that. Leaving the generator on for too long can lead to the battery being corroded as well. You should clean the battery terminals with a wire brush for the generator to work better.

Final Words

We hope that with the 7 steps we have shared, starting your generator will be a 

breeze. Leave a comment to let us know the results!

Reference source: Quick tips before running your generator that has been sitting up

Leave a Comment