How To Remove Wood Stain From Wood: The Best Methods For You

To achieve the greatest result when upgrading hardwood floors or refinishing furniture. You must first remove the old wood stains. Because wood stain seeps into the grain of the wood. Removing it may be a difficult task.

That’s why you might not know “how to remove wood stain from wood”. Don’t worry, Power Tool has the right article for you. Stay tuned and find out the best solutions for your problem via this article.

How to remove wood stain from wood?

Following these steps carefully and you can remove wood stain from wood:

  • Step 1: Set up your workspace
  • Step 2: Sorts your tools and materials
  • Step 3: Transfer the stain tripper to a smaller container
  • Step 4: Apply a heavy coating of stripper to the wood’s surface
  • Step 5: Allow the tripper to soak
  • Step 6: Scrape the tripper off the wood’s surface
  • Step 7: Wipe the surface
  • Step 8: Sand down the surface 

Most stained wood includes a protective varnish covering. You must remove it too. That’s why first you must use a chemical stripper to remove the varnish. While doing this, part of the stain will also lift.

After that, you may sand away the wood’s surface. This will remove the majority of the stain. Minor scratches can also be sanded away. And large gouges can be filed up.

How To Remove Wood Stain From Wood

Materials and tools you should prepare beforehand

For removing the stains, you need to prepare some materials and tools first:

  • Chemical resistant gloves
  • Safety glasses
  • Respirator mask
  • Natural bristle paintbrush
  • Chemical wood stripper
  • Plastic scraper
  • Steel wool
  • Rags
  • Sandpaper: medium grit, fine grit
  • Electric hand sander

Steps to remove wood stain from wood

  • Step 1: Set up your workspace

You should aware that most wood strippers are very harmful. They contain strong chemicals that are hazardous to your health. And should not come into contact with your skin.

Work outside if feasible. If your wood item is too huge or immobile, open the windows. And make sure that space is well-ventilated.

To protect your work area, use a drop cloth and lay it down. This happens if you are stripping stains from a piece of furniture.

  • Step 2: Sort your tools and materials

Keep the paintbrush, stripper, and plastic scraper close at hand. Wear protective gear, such as a long-sleeved shirt, long pants. You should wear closed-toed shoes too.

Put on the chemical-resistant gloves and your safety eyewear before opening the remover. Put on the respirator.

Keep in mind that don’t let the remover get on your skin or into your eyes.

Before using the chemical stripper, read the instructions. They may have precise suggestions for the best protective equipment to utilize.

Using a paintbrush to apply a heavy coating of tripper to the wood surface

  • Step 3: Transfer the stripper to a smaller container

Use only corrosive solvent-specific containers. Such as a disposable aluminum pan or a metal bowl.

Pour the stripper gently into the container. There shouldn’t get on your clothes or the floor.

  • Step 4: Apply a heavy coating of stripper to the surface

Dip the paintbrush into the stain stripper. Apply a heavy coating to the wood. Brush it carefully across the wood’s surface. Make sure it completely coated.

If you’re working on a large piece of furniture. It’s simpler to remove the stain from a small section first. Rather than the entire item at once.

  • Step 5: Allow the stain stripper to soak

It should soak for 15 to 20 minutes.

However, for precise time directions, see the label on your stain stripper. Every few minutes, look at it.

Apply additional strippers if you see any dry spots.

  • Step 6: Scrape the stripper off the wood’s surface

To scrape the varnish and the stain, use a plastic scraper. Begin with one edge and press the scraper in a straight line through the wood’s surface.

Scrap the debris and repeat the process in another place. Continue to scratch the surface of the wood on all the stain strippers.

Using wool pad to wipe down the surface

  • Step 7: Wipe the surface

Tear a steel wool pad and wipe it down the surface. Track the grain direction. Make sure you go into every nook and every jerk.

When you are sure that you have removed the protective layer. Wipe the wood surface clean with a damp towel.

Allow the wood to dry. It can up to 24 hours for it to dry.

  • Step 8: Sand down the surface

Sand the surface with medium-grit sandpaper once the wood has dried. Use an electric hand sander while working on a broad area.

Continue sanding until all traces of the varnish and stain have been removed. As you sand more, the current stain will wear away. And it will reveal the bare wood beneath.

Using sandpaper to sand down the surface

Why should you use a wood stain remover?

A wood stain remover is a way to go if you want a quick and easy approach to remove stains. While there are several alternative ways available. None are as simple as utilizing a wood stain remover.

Scrapers, for example, will take an eternity and are highly labor-intensive. The same is true with a heat gun.

While you might use a power sander or rotary grinder. You’ll be dealing with a lot of dust and paint chips everywhere.

This is not only inconvenient for cleanup, but it is also bad for your health.

Related Articles:

Frequently Asked Questions

1. Will vinegar remove the wood stains?

Yes, it will. Using vinegar is one of the other hacks that you could use to remove wood stains.

2. Are there other hacks to remove the wood stains?

There are plenty of hacks, to be honest. You can use salt, petroleum jelly, vinegar. People also use mayonnaise or toothpaste too. But remember that wood stain strippers are your best choice.

3. How do I get scratches out of wood?

Some woods scratch more easily than others. We propose that you get pricey things properly polished. You can use paste wax, lemon juice, olive oil to solve this problem.


To sum up, using wood stain strippers is the best way for you. In this article, we showed you “how to remove wood stain from wood” in a proper way. We hope that this will help you solve your problem.

Reference source: How to Strip Stain From Wood : Furniture Repair Tips

Leave a Comment