In the interior works of houses, there are many items where you can use wood as the main material. Wood has many great advantages such as lightness, eye-catching, high aesthetic… However, over time, wood can be damaged and degraded. Within the scope of this article, we will show you the easiest fix. Please read the article.
Table of Contents
- How to fix splintered wood?
- Please assess the status of the problem in any case
- How you fix small debris
- How to repair in case of missing fragments
- How to repair rotting wood?
- Final Words
How to fix splintered wood?
To fix splintered wood easily, follow these steps:
- Check the problem status
- Please clean the broken area, remove all debris.
- Use glue in 1 layer and reattach.
- Sand the broken area.
- Fix the broken area with a heavy object.
- Leave the wood in the sun for the glue to dry.
- Remove the wood fixer, then clean the glue and the surface.
- Finish it again.
Here are 8 basic steps that you can use for any damaged wood and material. Treating the wound as soon as possible will help your interior look more aesthetically pleasing and last longer. Here is our detailed step-by-step guide for each type of wound.
Please assess the status of the problem in any case
Before going into detailed instructions for problems, we introduce the first step of any processing.
Only when you examine the condition that can you categorize it into what type of treatment. Then, you start with the detailed steps that follow.
Some common conditions you may encounter are as follows. There are some small pieces of debris that are about to come apart. Some parts are broken and have fallen out, gets wet and becomes rotten, or there may be cracks in the wood.
How you fix small debris
In case your furniture only has a problem with a few small pieces of debris, the repair will be very simple. Get started with our step-by-step guide below.
Step 1: Prepare the ingredients
Here is a list of the ingredients that you need to prepare to deal with the problem with small debris:
- High-quality wood glue
- Wax paper
- An old rag
- Anything flat and heavy
- Some sandpaper.
Step 2: Use Splinter glue
Now drag the edge where the problem occurs. Be careful not to aggravate the problem! Then you put a sufficient amount of wood glue on the broken part. Finally, push down the small pieces of wood and hold it with your feet for a few seconds. And remember to use a rag to wipe away the excess glue.
Step 3: Squeeze the wound to make it perfect again
At this point, use dry wood glue, and depending on weather conditions, the glue can take anywhere with a few hours to more than a day to fully dry.
Let your piece of wood become perfect after wound repair. Put a piece of wax paper over the area you just poured the glue on and use your foot to fix it. Then, apply a good, heavy surface to the wound and wait until the glue is completely dry.
Step 4: Use sandpaper
After the glue has dried and removed the heavy object to press the glue, use sandpaper to smooth and beautiful everything as it was.
How to repair in case of missing fragments
We will guide you in the case of broken wood and missing pieces. Here is our guide for you.
Step 1: Prepare the ingredients
Here is a list of the tools you need to prepare
- A small chisel
- A little rough sandpaper
- High-quality wood filler is slightly darker than the original wood
- A paring knife
Step 2: Clean the broken area
Because the problem is quite serious, the pieces are missing. So we will need to fill the holes with wood filler. In order for the wood filler to bond well with the wood, we need to slightly repair this area.
Start with your chisel to remove any wood chips from the surface of the dent. Then use sandpaper and proceed to sand around the area.
Step 3: Fill in the blanks
To fill and harden the gap, use wood filler to fill it. Until the area is flat like never before.
Use your cleaver to bring things back into balance. Give it time until the wood filler dries again, then move on to the next step. You can use other materials like wood filler if you wish.
Step 4: Sanding
After the glue and wood grade have dried. You use sandpaper to remove scratches or excess objects so that the wood is balanced and smooth again.
How to repair rotting wood?
You check the condition and discover that there is a part of the wood that is not only broken, but also rotting. This problem is quite serious but not unsolvable.
Step 1: Replace the rotten wood
In case the rotten part has become severe and has spread beyond your control. Please replace it.
Step 2: Prepare materials
In case the rotted part of the wood has not gone completely on the wood, we can repair it. You need to prepare the following tools:
- A chisel
- A little wood filler
- A putty knife
- One layer of epoxy pretreatment
- A little sandpaper.
Step 3: Clean the rotten wood
Start using a chisel to remove damp or rotting wood. Get rid of all that wet and rotting wood. You then start a pre-treatment with epoxy to prevent the rot from spreading.
Step 4: Fill the hole
As above, use wood filler to fill it, and remember to mix glue for it! Then you remember to shape and wait for the glue to dry again.
Step 5: Sanding
To make everything nice and smooth, use some sandpaper back and forth until the shape is back to its original shape.
Repairing damaged wood is not too difficult if you follow exactly what we have instructed. With the above information, hopefully, you are ready to repair the damage to your interior.
Reference Source: The Work Around: How to Fix Splintered Wood | HGTV