Can You Apply Polyurethane With A Roller? Helpful Details

Introduction

Polyurethane is one of the greatest wood finishes on the market today. This layer can protect the surfaces from scratches, moisture, and other defects. But Can You Apply Polyurethane With a Roller?

In this article, we will discuss some key points relating to this topic along with other tips to complete your work without a glitch. So let’s get started!

Can You Apply Polyurethane With A Roller?

Yes, of course, you can. A paint roller is a good choice for people who want to ease and speed up this work as they cover a larger area. 

What Kind Of Roller Should You Use For Polyurethane?

So long as your target has a flat finish, you need to use short paint rollers made of lambswool or fiber. They avoid the mixing of lint and dust with the end exterior of polyurethane. 

At first, many people may find it complicated to get rid of those problems. 

Advantages Of Using The Roller

Polyurethane is a hard layer that you can apply to a surface with a roller.

The first and foremost benefit of adding the substance with a roller in comparison to other techniques is how fast it could be. 

Besides saving a portion of time, using this method can allow you to work without the help of more than one person.

Can You Apply Polyurethane With a Roller?

Another advantage is that the amount of applying substance is much easier to control. As you roll this over the floor, you can use less or more pressure.

Furthermore, a nap roller will also help prevent any surplus material. It might cause other application methods to be a usual problem and discoloration in some areas when they are broken.

Unlike brushes, nap rollers are made for the use of lots of modern materials, including liquid ornamental plaster.

Disadvantages Of Using The Roller

There are a few criteria you need to consider before you use a roller to add polyurethane. 

A roller costs an arm and a leg compared to a common brush. Even so, get a renewal cover, and you can have the roller as a useful tool in the long term. 

Another drawback is that a nap roller does not work in inaccessible places such as joints and corners. In these cases, a brush can help you effectively.

How Can You Apply Polyurethane With A Roller?

  • Prepare rubber gloves and masks to protect yourself from contacting toxic substances and inhaling fumes in polyurethane.

Fill a paint pot with some mineral spirits. Place another paint pot closer to the flat and beside the pot you just prepared. Fill it with a polyurethane formula.

  • Soak a clean rag in mineral spirits and wipe the flat down. By doing this, you can remove almost all dust from the flat. Then wait a few minutes for the substance to evaporate, and you can start the work.

  • Put the nap roller gradually into the pot that contains the mineral spirits and thoroughly humidify its surface. 

Shake off excess mineral turpentines to ensure that they don’t fall in small drops. To properly stick polyurethane, we need a clean, humid paint roller.

  • Then, you put the same roller inside the polyurethane pot and let it soak.
  • Roll a sparse layer of the compound over the wooden floor surface that you want to cover. Roll quickly until the roller no longer has polyurethane.
  • Wait until the compound gets dry. The drying process differs according to ambient temperature, but generally, a new polyurethane coat can be added after three hours.
  • Prepare high sandpaper. After finishing the first layer, you need to sand the flat where you are working to enhance its stability before taking the second one. 

Then soak a clean rag in mineral spirits, remove excess and wipe the flat to clear any dust before moving to the next layer of polyurethane.

  • Repeat the above process until you have added two or three polyurethane layers.

 

Related Articles:

Cleaning Up After Finishing

Remember to clean up after finishing your work.

  • Polyurethane can be poisonous to your skin, so before washing the used material, make sure you dispose of the excess.
  • Use hot water to wash the nap roller to remove all the substances off it.
  • To get off all remaining mineral spirits and polyurethane from the roller, use hot water to wash it.
  • Eliminate the dried material from the pot with a flat blade screwdriver. Then use hot water to wash the pot.
  • Unless you have used up the polyurethane, ensure to transfer it to a different can and close tightly to reduce the quality of the product.
  • Dry all the tools with a cotton cloth and put them away for future use.

Conclusion

Now that you have got the answer about “Can you apply polyurethane with a roller?” and some further details on this topic. Hopefully, with this article, you can paint the wooden floor by yourself. 

Reference source: How to Apply Polyurethane with a Foam Roller

Leave a Comment