You also need to find the best Milwaukee impact drivers. An impact driver is a powerful tool. It is prominent in most households because of its several applications.
In today's world, all tools and equipment have gone through innovations. One of these is an impact driver. You can use this in your house without using any fuel type or air compressor.
When it comes to the best producers of impact drivers, Milwaukee has the throne. They are in the industry for many years. Within these years, they have produced several models of high-quality drivers.
In this post, we picked the top 7 best Milwaukee products to review. This review will help you pick the right model of Milwaukee impact driver that will meet your needs.
Read on to know further.
Table of Contents
- 1 Top 8 Best Milwaukee Impact Driver for Beginners Review
- 1.1 MILWAUKEE'S Impact Driver 2853-20
- 1.2 Milwaukee 2656-20 M18 18V 1/4 Inch Lithium Ion
- 1.3 MILWAUKEE'S 2462-20 M12 1/4 Inch Hex Shank 12 Volt Lithium Ion
- 1.4 Milwaukee M18 2850-20 18-Volt 1/4-Inch Brushless
- 1.5 MILWAUKEE'S ELEC TOOL 2760-20
- 1.6 M12 Fuel 1/4" Hex Impact Driver Kit
- 1.7 Milwaukee 2551-20 M12 FUEL SURGE
- 2 Things to Consider While Choosing the Best Milwaukee Impact Driver
- 3 Final Words
Top 8 Best Milwaukee Impact Driver for Beginners Review
To know more about the starter miter saws recommended in the table above, you can read our more comprehensive review below.
MILWAUKEE'S Impact Driver 2853-20
Impact drivers are on the rise in this generation. You can rarely see a person who still uses drill drivers. We present to you the MILWAUKEE'S Impact Driver 2853-20 which has everything you need. This impact driver is available with an accessory adapter. This feature allows you to change the tool's head with ease and convenience.
The brushless motor works by reducing the heat and friction of the tool. When fully charged, it will enable you to use it for up to 30 percent longer. The REDLITHIUM battery pack allows you to do more work on a single charge.
The four-mode drive control gives you the luxury to pick your preferred power and speed from its four modes. You can install this strongest Milwaukee impact driver in less time through the self-tapping mode for the screw. Aside from that, this power tool is not only dependable but also strong and compact.
Despite the project type you have, this best Milwaukee impact driver has your back.
There are loads of things you can do using this impact driver. At a very meager cost, you can now get this rugged and solid-built power tool. There are only a few drawbacks you may notice with this product. One of them is it is quite hard to clean. Taking off the grease may require some time.
After all, this is a tool designed to work with anything. So, you can expect that it will turn dirty over time. But, don't worry. There are quality cleaning products you can find on the market. These products will not only clean the tool but also maintain its quality work.
Milwaukee 2656-20 M18 18V 1/4 Inch Lithium Ion
This Milwaukee 2656-20 impact driver is perfect for professional diesel and gas mechanics. If you are still using a hand tool, this is the right time to replace them with impact drivers.
LED Lighting – If you are working in a dimly lit area, the LED lighting feature of this impact driver will help you. You can find this feature at the bottom part of the quick-connect chuck. This feature will also help you to see screws clearly.
Textured Handle – Aside from being compact, this best impact driver Milwaukee has also a textured handle. This means that you can have a better grip on this power tool. Even when working in slippery conditions, you won’t experience any hassle.
Redlink Technology – This power tool’s M18 batteries and electronics work together. Their teamwork allows the impact driver to function properly. It also prevents overheating.
Variable Speed Trigger – This feature allows you to find the right pressure for your project. In every minute, this helps the motor can make more than 3,450 impacts.
This is the most powerful Milwaukee impact driver because it can loosen larger brake and fasteners. Despite that, you can modulate it easily. Over time of using it, putting torque on its fastener would not be a problem for you.
It works very quickly in most screws. It is also compact and lightweight. This means you can take it wherever you want. Also, it has Milwaukee batteries that last for many years.
This impact driver is compatible with any form of M18 battery. So, you don’t have to worry if its battery runs out of charge. There is no doubt why Milwaukee is the most popular and reliable impact driver manufacturer worldwide.
MILWAUKEE'S 2462-20 M12 1/4 Inch Hex Shank 12 Volt Lithium Ion
Another best Milwaukee strongest impact driver for automotive use is Milwaukee’s 2462-20 M12.
LED Lighting – Like the Milwaukee 2656-20, this impact driver has also an LED lighting feature. You can automatically activate this feature. You can find the LED light panel in the front and above the trigger.
Considering its location, you won’t have to worry about any shadow while working. You can light up each part of your project to see it.
On-board Fuel Gauge – You can find this feature besides the impact driver. This feature allows you to how much battery the tool still has. Through this, you can determine when you need to recharge this power tool.
M12 Compatible – This Milwaukee impact driver is run by M12 batteries. Fortunately, it works with any batteries included in the M12 lineup. Also, this type of Milwaukee battery is available in any store. So, you don’t have any trouble finding one.
RedLithium Technology – This Redlithium technology communicates with the compter’s internal technology to run this driver. This works by using the right power it needs to function. Also, this feature prevents your driver from overheating.
The good thing about this impact driver is that it is compatible with M12 batteries. You can find m12 batteries on any market. So, you don’t have to worry when its battery stopped working.
This impact driver is good for removing bolts and driving screws. It can handle most works that require bolts and screws.
Compared to its previous versions, this impact driver comes with more advanced features. It is also made from quality and sturdy materials. If properly used and taken care of, it will last for about ten years.
This Milwaukee impact driver is durable and convenient. Not only that, but its size is perfect for home use. But, despite being compact, it can handle any size of the project.
If you will use one m12 battery, you may stop your work several times to recharge it. But, if you prefer four m12 batteries, you can use them for five hours straight. So, if your project requires a longer time, using several batteries would be great.
Milwaukee M18 2850-20 18-Volt 1/4-Inch Brushless
You can find the best Milwaukee impact driver on the market these days. One of these is the Milwaukee M18 2850-20. Most of its users gave it a 5-star review and were very satisfied.
Milwaukee Brushless Motor – This feature allows you to get the best out of this impact driver. It gives the driver produce efficient works. With this feature, your impact driver can have a longer life and more run-time.
M18 Compatible – This is the best Milwaukee m18 impact driver. This means that it is compatible with all M18 batteries. Plus, you can find m18 batteries in most shops near you.
Compact Design – Considering its size, it is perfect for working in smaller areas. Also, this will be a great help for you when doing overhead works.
This impact driver will give you a satisfying work output. This works in any size of hardware. It is powerful enough to handle any type of work.
It is lightweight and not harsh to your hands. Even if you use it for longer hours, your hands will not feel the strain. When fully charged, you can install and remove several bolts and screws.
Since it uses M18 batteries, you don’t have to worry about frequent stops while working. A single M18 battery can last for at least two hours. Also, it would be better to use more than two M18 batteries for uninterrupted works.
This is a good investment for DIYers and amateurs. It is easy to use and does not require complicated steps to install. When you have this tool on your hands, you don’t need to use nails and a hammer.
MILWAUKEE'S ELEC TOOL 2760-20
Are you the type of person who uses impact drivers every single day? Well, opt for a rugged one. In that case, this MILWAUKEE'S ELEC TOOL 2760-20 is perfect for you.
4-Mode Drive Control – This feature allows you to pick the right power and speed for your project. Thus, giving you more efficient work and results. Whether you are working on a small or large project, this feature will help you finish it efficiently.
Red Lithium Batteries – Red lithium batteries have a longer life. This means that you can finish a two-hour work without running out of charge.
Redlink Plus Intelligence – You don’t have to worry about damaging your batteries because of overheating or overloading with this feature. Redlink Plus Intelligence is an updated feature added by Milwaukee to some of their products.Fully-Drive Hydraulic Powertrain – This feature gives you noiseless operation. This is because it prevents contact between two metals in the tool. Aside from silent operation, this feature increases the tool’s durability.
This is one of the best Milwaukee impact drivers on the market today. You can use it in installing concrete and drywall anchors, metal screws, and other types of bolts and nuts.
No matter what type of project you are working on, this Milwaukee impact driver has your back. With this on your hands, you don’t need to use nails and hammer to join two materials together.
Fasten either #10 or #8 screws to your driver when working on thin metal sheets. These types of self-tapping screws are perfect to avoid stripping.
If frequent stripping out of screws is your problem with your previous impacts, you may try this one. It works without producing loud noises. So, it is perfect for any situation.
M12 Fuel 1/4" Hex Impact Driver Kit
Are you looking for the best Milwaukee impact driver? Well, you should not look further than this M12 Fuel 1/4" Hex Impact Driver Kit. The package includes M12 Fuel Brushless motor, sturdy case, charger, and M12 batteries.
4-Mode Drive Control – Almost all models of Milwaukee impact drivers in this review have this feature. Well, everyone would love how handy this feature is. A 4-mode drive control feature allows you to keep output power and speed under control.
Red Lithium Batteries – This type of batteries power up your impact driver. When fully charged, you can use it all day long.
Redlink Plus Intelligence – This feature is perfect to keep your tool damage-free. It works in preventing overheating and overloading of the product.
Compared to other brands and models of impact drivers, this one stands out. Since it is compact, you can work with it in tight areas. This is ideal when making delicate connections.
Most of its users love how small and versatile this product is. Also, you won’t experience hand fatigue when you use it for a longer time. Many use it for automotive purposes because of its features.
Also, you don’t have to spend a lot to buy this impact driver. Many considered it as the cheapest version of Milwaukee power tools. If you are an amateur or have a tight budget, this tool is a great starter.
Many people love the placement of its setting options. You can use this tool to strip screws and bolts hassle-free.
Although many customers were satisfied with this tool, a few of them were not. One customer gave this product a one-star review. This is because, according to him, he finds it hard to remove its batteries.
But overall, there are no other complaints about this impact driver.
Milwaukee 2551-20 M12 FUEL SURGE
Instead of using a metal-to-metal mechanism, this Milwaukee 2551-20 uses a hydraulic powertrain. Compared to other impact drivers, this one works with less vibration and noise.
12V Impact Tool – This tool is not the first hydraulic impact driver. Despite that, this 12V tool is the first product to use that kind of technology. Since it is a 12V impact tool, you can use it with little or bulk power.
346 RPM – This tool has an average speed of 346 RPM. This speed is normal among all other 18V hydraulic drivers. But it is the first M12 impact driver that has this performance. This means that it outstands all previous 12V impact drivers.
87 Decibels – This impact tool has 87 decibels. This means that it is around 13 decibels quieter than other 12V effects. It has also a 10 times softer sound pressure level.
Since it has a long strike duration, this product can keep longer peak torque. Compared to traditional impact drivers, this one works faster. Although they hit much slower, each hit they produce makes a greater impact.
This is perfect to use if you want to drive small or medium-sized screws or bolts. Despite its size, you can use this impact tool in almost all your projects.
If you are looking for an impact driver that offers flexibility and power with little noise, this is perfect for you. No matter your skill level, a Milwaukee 2551-20 will help you create the best project.
Considering its quiet noise impact, it is ideal for indoor use. You can also do your project even in a closed-quarter or occupied building.
Things to Consider While Choosing the Best Milwaukee Impact Driver
For the past few years, many people rely on power tools to finish their projects. Whether you are a DIYer or a professional carpenter, you would agree that Milwaukee impact drivers are the best.
Milwaukee is a popular brand in the industry. They have made and released lots of models of impact drivers on the market. That being said, you may find it hard to find the best Milwaukee impact driver.
Don’t worry since this guide will help you get the impact driver that meets your needs. The following are the things to consider in choosing a Milwaukee impact driver.
Easy and Handy Controls
Most impact drivers feature an anticlockwise or clockwise trigger and switch. So, you must look for an impact that allows you to control both directions with your index finger or thumb.
Another feature to keep in mind is a control locking the trigger. This feature is important to ensure your safety. Besides, it also prevents your battery from draining.
In case the model you choose does not have this trigger lock feature, remove its battery when unused. Also, look for a battery with a high-power gauge. This feature will help you charge it easily and quickly.
If this is your first time buying an impact driver, you may not know what to choose. Luckily, you can find impact drivers with a brushed and brushless motor on the market. Between the two, the latter is a better investment.
Although brushless motors are not cheap, they are worth to invest. This is because they are rugged and can last for longer years. They are also efficient. You can use them together with any electronic or smart tools.
A brushed motor can also give you significant works without spending a lot. The problem is that you will not have the chance to experience the benefits offered by brushless motors.
Impact drivers can give you the strongest impact. But take note that not all your projects need massive force.
If you are buying for a driver, opt for a model with Variable RPM ranges.
You can find models with at least four-speed settings. They allow you to change your RPM from 0 to 3000 speed. If you are working on smaller projects, you may only need less than 500 RPM.
Another thing that you need to consider when buying a Milwaukee impact driver is the battery size. Remember, a large battery could give you a lot of power and can last longer. No matter the size of your project, it would be great if you will opt for an at least 18-volt impact.
Another factor to consider is the machine’s weight. An impact driver is a handheld tool. Working with them for a long time might tire, especially if they are heavy.
The ideal weight of your tool will always depend on your strength. But, it would be better if you will opt for a model that weighs under 5 lbs.
This might be the last thing to consider, but it still requires some time to think about. A storage case is a must-have accessory together with a charger or batteries.
If you opt for a battery-powered driver, store it in a protective case to avoid moisture. Also, chargers and batteries are more expensive than the driver itself. So, look at its added price before checking out.
As mentioned, impact drivers are must-have items in most households. You need to have the best Milwaukee impact driver to have a quality output of your work. Consider the factors we mentioned above to ensure you are making the right choice.
To sum it up, an impact driver allows you to drive in screws and remove bolts easily. Besides, you can perform a lot of work using this power tool.
Milwaukee is one of the best creators of impact tools on the market. They are in the industry for many years. This means that they have mastered the methods to make a quality impact driver.
When choosing an impact driver, you must check its features and the benefits offered. To get the best Milwaukee impact driver, consider the factors we mentioned above.