Aircat has certainly swept the power tool nation by storm, creating tools that are handy, powerful, and have shocking speed. Not only that, but they are completely pneumatic tools that are designed to be quiet, unlike other power tools that will leave your ears ringing for weeks. We’re going to specifically dive into the Aircat 1150 Review and see what it has to offer for consumers.
Table of Contents
1. Aircat 1150 Review Basic
To put it simply, the Aircat 1150 Killer Torque is the most powerful ½ inch impact available on the market. It offers a whopping 1,295 ft. lbs of loosening torque as well as 1,400 blows per minute. It’s the strongest hard hitting twin hammer in its class, which is why it is such a sought after piece of equipment. Aircat 1150 is also designed with a low decibel level of 86 dBa, which means you won’t have to hear any unwanted and excessive noises while using this tool. While it may be silent, don’t think it lacks in power!
2. The Design of Aircat 1150
Weighing in at only 4.63 pounds and being around 7 inches in height, it’s no secret that the Aircat 1150 Killer Torque is a very compact tool that will be able to deal with smaller areas with ease. The ‘L’ shape design is made for accuracy and control, finished off with an ergonomic trademark AIRCAT handle that is both comfortable and gripping.
3. Power of Aircat 1150
Although this tool may be small, it does not lack power. With the Aircat 1150 Killer Torque, you will be able to achieve up to 1,295 ft. lbs of loosening torque. Combined with 1,400 blows per minute from the twin hammer, Aircat 1150 is a powerhouse that can handle tough jobs with ease. Aside from that, you also have the 15 percent larger rotor that gives this little tool an incredible amount of power behind it. An all-around handy, larger-than-life design that’s jam-packed into a small device.
4. Accessories and Warranty Information
With the Aircat 1150 Killer Torque, you will receive 2-year parts and labor warranty, which is great if you end up having any issues with your tool and need it replaced or fixed as soon as possible.
Things we liked
If you are looking for a small, extremely powerful tool that can get the job done, this is it. The Aircat 1150 Killer Torque really is a ‘killer’ piece of equipment, with plenty of power that offers up a whopping 1,295 ft lbs of torque and 1,400 blows per minute. Aside from that, it’s a compact design that can be used just about anywhere. The low decibels ensure we don’t have to listen to a loud, noisy tool, instead of having a quiet power tool that gets the job done without damaging our eardrums.
Things we didn’t like
We have to consider the fact that this IS a relatively small piece of equipment, and that it could have flaws because of that reason. If it’s used excessively it may have a tendency to get stuck or have some damage. We also don’t like the fact that it has to be plugged in in order to work (it’s a corded tool).
5. How does Aircat 1150 compare with others?
Aircat 1150 vs Snap-on mg725
The major difference between the two would have to be the price. The Snap-On is a lot pricier than the Aircat 1150 Killer Torque. The Snap-On does have certain advantages though, claiming to have some of the highest powerful torque on the market which is standard with Snap Ons. It also has an incredibly quick motor start and magnesium housing.
Aircat 1150 vs Nitrocat 1200k
The biggest difference between these two tools would be that the Nitrocat 1200k has a twin clutch mechanism for the hammer, and has a unique exhaust that’s built through the handle to ensure that debris is consistently kept out of the face of the user.
Aircat 1150 vs Ingersoll Rand 2235TiMAX
In this circumstance, the Ingersoll Rand 2235TiMAX differs from the Aircat model in its torque power, which is slightly bigger at 1,350 ft lbs. It is also made with a titanium hammer case and steel-wear plates over the composite to ensure durability and longevity.
Aircat 1150 vs Nitrocat 1250k
The two models are almost identical, except for the fact that the Nitrocat 1250k is a twin clutch mechanism and has more torque power (1,300 ft-lbs).
Ingersoll Rand 2135TiMAX vs Aircat 1150
When it comes to the Ingersoll Rand 2135TiMAX, it comes with a few ‘newer’ features that aren’t found on the Aircat 1150 Killer Torque. This includes a specialty touch trigger that allows for a wide range of power settings in forward as well as a patented push button that provides precision and control as you forward and reverses with ease.
Aircat 1150 vs Earthquake XT
The Earthquake XT also has features that aren’t found on the Aircat 1150, but it costs quite a bit more. With the Earthquake XT, you can enjoy a completely cordless power tool that includes an LED light, variable speed trigger, and an electronic brake for ease of use.
Aircat 1150 vs Ingersoll Rand 231c
The Ingersoll Rand 231c only offers around 600 ft-lbs of torque, so it fails in comparison to the Aircat 1150. However, you can enjoy some other features such as the adjustable power regulatory and exclusive impact mechanism.
The Aircat 1150 Killer Torque is a handy, small, yet extremely powerful piece of equipment that can handle just about anything. It’s the strong tool in its class, and its torque and blows per minute are competitive with larger models.
Reference Source: https://aircat.com/1-2-impact-wrench-655